• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps allow your pet to go inside and out at their own pace, without needing to let them in or out. They can also help prevent your cat from peeing in the home.

It is simpler to install the cat flap on a Upvc panel than one made of glass, but you will require some knowledge and right tools.

Take a look at the Door

Fitting a cat flap in the door can be a challenge but if you select the right kind of cat flap be patient and follow the steps provided it should not prove to be a problem. We will demonstrate how to draw the shape using the jigsaw to cut out the door's opening. Then we will finish the job by attaching the flap. This will ensure the flap remains in place and protects the doors from the damage caused by wind and rain.

The first thing you need to do is take a measurement of the width of your pet in order to get an accurate measurement of the size of cat flap installers near me flap you will require. This will enable you to select a cat flap that is large enough for your pet to walk into the house and exit without having to open the door every time.

Once you have the measurements, you can determine where on the door the template should be positioned, usually this is done with an X, but some kits include a drawing that shows where to drill, if you have one, then attach it to the door and use a pencil to draw around the door. If your door has sill or moulding on the bottom edge ensure you have enough space to ensure your cat's safety and will prevent them from getting access to your home.

Next put on your eye protection and a dust mask. Then using a jigsaw, begin cutting according to the lines you've drawn in, but don't press the blade too hard because this will cause it to cut more quickly than you would like it to. If you have a set square then use it to check whether you're cutting in the right way and to ensure that the hole is in a rectangular shape. Once you are satisfied with this you can begin to remove the remaining door material.

Draw a Line

The cat flap is a great way to allow your pet to go out and in without having to worry about them being in the house with guests or leaving unwanted gifts inside the house. It also prevents drafts and helps to keep the temperature inside your home in a stable manner. The installation of a cat flap fitting flap your door can be a daunting task to those who haven't done it before. A lot of people will hire a professional carpenter or joiner to complete the work. While this is certainly an option, it's possible to do the job yourself if you own the appropriate tools and follow the instructions carefully.

This is much simpler to do with a wooden door, but it is possible with uPVC. However it is important to be cautious not to damage the doors as this could cause the door to be damaged and invalidate your warranty. The first step is to measure the door, ensuring that it is able to accommodate the new cat flap. If you have an ordinary uPVC panel it's easy. However when your door is composite or another type of door, you may require more care.

The next step is to determine the belly height of your cat. This is the amount of height between the floor and the bottom of your cat's stomach. You will need to find an area at the entrance that will allow your pet to comfortably pass through. Once you have this information, you will be required to mark the area with pencil and a spirit level to be certain that the hole you make will be a good fit for your cat.

After you have marked the area, it's time to cut the hole. It is crucial to be patient and use a jigsaw ensure the cuts are clean and smooth not uneven and rough. This could cause damage to your door. Be sure to wear safety glasses and a dust-proof mask at all times when working with the jigsaw as inhaling the sawdust could be harmful to your health. After you've completed the cutting, you will have to smooth the edges of the hole with sandpaper, so that your cat flap will fit easily into place.

Cut a hole

Getting a cat flap fitted into an existing door panel or double glazing sealed unit can be quite difficult. You might be tempted to tackle the job yourself, but unless you have a lot of expertise in DIY, it's likely to be best to have a professional in to do the task for you. A faulty job can not only be ugly and unattractive, but could also be an security risk. It could let cold air to enter when the cat is outdoors and hot air out when inside.

Mark the hole position on the door using an eraser and a spirit level. This will ensure it is positioned correctly and is flush with the door's other parts. Make sure you have some sandpaper in your possession to smooth any rough edges.

Wear any safety equipment you require when working with an electric tool. If you're worried about noise, you can get an electric jigsaw that is quieter and more user-friendly.

It is best to only remove the material that is required to fit the cat flap. It is necessary to leave a little extra material for the wall thickness of the flap. However cutting away too much could cause issues or even damage to the frame of the door.

A door made of upvc may contain a metal frame or a panel inside that will interfere with the microchip cat flap if this is the case you'll need to cut an oversize hole so that the metal does not come into contact with the the cat flap. If this is done it is important to fill in the oversize gap and make it watertight.

If you're looking to install a cat flap in a upvc or double-glazed window with frames made of metal you'll need to talk to a specialist. They can provide you with a brand new piece of glass that has the hole already made for the cat flap. It will be much cheaper to have this done than to attempt to fix the cat flap onto an existing glass pane that was not designed specifically for the purpose.

Install the Flap

Cat flaps give your pet the freedom to come and go anytime they want and allow them to be comfortable at home whenever they want to. If you've got a uPVC door, it might be difficult to fit a cat flap, especially in the absence of glass panes that can be cut to fit one. If you're willing to install a half-glazed uPVC replacement panel, it is possible to add an additional cat flap. It's not as easy as just cutting a hole in the door however, and there are some things you'll need to take care of first to ensure that it's secure.

A composite door cat flap, upvc door panel with cat flap, or GRP door panel is typically comprised of a plastic skin that is attached to an insulating polystyrene core. The material is quite fragile and care must be taken when cutting into it to avoid damaging. This type of door typically comes with a template drawing that you can use as a guide to cut the hole into the door.

Once you've marked the opening in your front door, it's time to install the cat flap. You can choose from a variety of options, from simple push-button flaps to microchip-activated ones that allow your pet in. However, no matter what kind of cat flap you select, it's crucial to ensure that your cat can comfortably use the flap without becoming trapped outside in bad weather.

It's a good idea to select circular fittings instead of one that is square, because circles are more securely cut into the door glass. This is because square holes can make glass more vulnerable to cracking if a drill is used on it. This is also a safer choice because you won't need to drill into the toughened glass that could shatter and harm your pet or family. This is especially important if there are elderly or children in your home that could be injured by glass shards.