로고

아이엔제이컨설팅(주)
로그인 회원가입
자유게시판

상담센터 031-441-8840

평일 09시 - 18시
주말, 공휴일 휴무

  • 자유게시판
  • 자유게시판

    Guide To Ghost 2 Immobiliser Installation: The Intermediate Guide On G…

    페이지 정보

    profile_image
    작성자 Swen
    댓글 0건 조회 4회 작성일 24-09-28 17:47

    본문

    Autowatch Ghost II Immobiliser Installation

    Ghost immobilisers represent the latest in vehicle security. They are revolutionary because they protect your vehicle from key-cloning as well as hacking.

    311135906_1281855972636056_2987376612771239945_nlow.jpgThe system has a unique disarm sequence, that requires the correct pin code to start your vehicle. This is done by pressing the buttons of your steering wheel or dashboard.

    TASSA Approved

    The brand new TASSA verified Ghost-II CAN immobiliser from Autowatch is a groundbreaking device created to tackle the latest car criminality trends, such as key hacking and cloning. This innovative system connects directly to the CAN network of your vehicle, and prevents it from being turned on or driven if you don't have the correct code. The system is completely undetectable, and doesn't utilize radio frequencies or an electronic key fob, rather it lets you create an individual PIN sequence using existing buttons in your vehicle, such as the ones on your steering wheel or dashboard, which you can change at anytime. The PIN can be as long as up to 20 presses long for maximum security. A secure emergency code is also included.

    The system works by communicating with the vehicles CAN data network to identify the moment a particular PIN is entered. It then sends a signal back to the vehicle that disables the engine and ignition, and shuts down vital components such as the starter motor and the fuel pump. The system features a "valet mode' which allows you to disable it and prevent valets or staff from driving your vehicle without the right key.

    The Ghost device is different from conventional immobilisers that can be disabled with professional diagnostic tools. It uses the onboard network to communicate with ECUs, and it cannot be altered. It's a sealed device, which means it is not possible to monitor the circuits, which makes it virtually impossible for thieves to hear the tell-tale clicking noise that traditional immobiliser relays make.

    This technology isn't susceptible to jamming tools utilized by high-tech thieves, and it is undetectable by any other diagnostic tool since it uses the CAN data networks. This makes it the ideal anti-theft solution for any modern vehicle.

    Once you've booked your TASSA approved ghost 2 immobiliser, we'll set up an appointment time and date to visit your business or home to carry out the work. We'll walk through a thorough demonstration with you and will then provide you with an owner manual as well as an emergency card, two Autowatch window stickers as well as an installation certificate.

    Insurance Approved

    The ferrari ghost installer 2 immobiliser installation (Highly recommended Resource site) is an aftermarket security gadget that shields your vehicle from the types of thieves that are interested in stealing your car. It works by preventing your engine from starting until certain buttons is activated. The only person who knows the sequence is you. If your car is stolen and the thieves are able to start it and leave your car alone out of fear. Ghost also has silent mode, which will disable the vehicle if it is not in use and can be turned off with the push of a button.

    The system is fully TASSA (Tracker and Aftermarket security systems association) insurance-approved, which means it will be recognised by some insurance companies as an additional security measure on your vehicle. It can be utilized together with other approved by Thatcham security measures, such as trackers, to help prevent your vehicle from being taken. This will give you extra security.

    In addition it communicates with your vehicles ECU via the CAN data circuit. This makes it inaccessible to diagnostic tools and completely quiet. This means a thief can't simply insert a new key or change the ECU to disable the Ghost. The system will only start your vehicle when you enter the correct pin code. This unique pin code is only yours to know and can be changed at anytime.

    The Ghost is a discreet immobiliser that can be added to most vehicles without the need for wiring or the addition of aftermarket key fobs. It is linked directly to the vehicles data network CAN and the personal PIN code you choose is programmed in it using buttons already present on the dashboard and steering wheel. The code then stops the vehicle from starting unless the correct sequence is chosen first. If the code is misinterpreted, there are emergency codes that are secure that can be reset with your mobile phone. In addition to this it is possible to use an easy-to-use app available for iOS and Android which eliminates the need to enter your pin every occasion, ensuring more hassle free security.

    Discreet

    Contrary to the GPS tracker that only aids in finding your vehicle after it's stolen, an immobiliser device stops the vehicle from being stolen in the first place. This is accomplished by preventing the engine from starting until the correct code is received via the key fob, or via an app downloaded to the smartphone. This is a great method to avoid wheel-jacking as well as other types of theft because the person who is stealing is forced to leave the car in its place or risk being taken into custody.

    The ghost immobiliser installer immobiliser is a tiny weatherproof device that is fitted inside the wiring harness of your vehicle. It is concealed and connects to the CAN data network. This means that thieves cannot detect it or disarm by cutting wires. The system also comes with an option for service mode that can be enabled to allow garages to work on your vehicle without needing to know the passcode required for it to start.

    After you've had the device attached to your vehicle you'll be able arm and disarm it from your smartphone using its dedicated app. You can even change the PIN code at any point to ensure that only you have access to your vehicle. This is helpful if you intend to sell your car in the future as it can increase its price of resales.

    The Ghost immobiliser comes with a unique feature: it's discreet and won't leave any marks on the interior body of your vehicle, making it a perfect addition to any car. It's easy to fit it, is silent and won't disrupt the other systems inside your car.

    Many people are now putting more focus on the appearance of their cars So having a discrete immobiliser can enhance the appearance and feel of your vehicle. This is particularly appealing for those who regularly use their cars to transport valuable goods, since it can stop potential thieves from pursuing them. The ghost 2 immobiliser installation immobiliser works in conjunction with other anti-theft systems like trackers to provide unparalleled protection for your vehicle.

    Low Maintenance

    Ghost immobilisers function by connecting directly to the CAN data network. They are virtually invisible, since they don't utilize LED indicators or other key fobs. It doesn't emit radio signals, and is also quiet, so thieves cannot detect it. It can be hidden in many different locations, (even beneath the floor mats) and is a great choice for those who wish to protect their car without sacrificing style.

    This device blocks you from starting your car until you enter an individual password. This is accomplished through a combination of buttons on your dashboard and steering wheel in a specific sequence. This will stop thieves from cloning or hacking into your system, and stop them from starting the vehicle.

    Thieves may also try and boost your signal to gain access to your vehicle, however the Ghost will detect this and stop your vehicle from starting until input the correct disarming sequence. The Ghost is unlike other security systems which can be activated with the incorrect code. It will continue to block your car from starting up until you enter the correct passcode.

    The Ghost remains in service mode until you put it back into service mode which is activated by pressing the same button combination that you used to arm it (this is possible when you visit your dealer for maintenance or warranty work). This is to stop it from being taken off by people who are not authorized and to ensure that it is fully armed whenever it is required.

    If you decide to change vehicles in your ownership it is possible to transfer the Ghost to the new vehicle provided the new vehicle is compatible. The most recent version of Ghost also comes with QR finger print stickers that are connected to the International Security Register, meaning that in the event that your Ghost is taken for parts, it can be traced back to you and your vehicle. This can discourage criminals from stealing vehicles fitted with Ghost because they know that they are safe and would risk getting caught and arrested.

    댓글목록

    등록된 댓글이 없습니다.